Output of measured values scanCONTROL Gateway Each scanCONTROL Gateway can be connected with up to 4 sensors. It communicates with the scanCONTROL SMART sensor or the gapCONTROL sensor via Ethernet Modbus. The resultant values are then converted to Profinet, EtherCAT or Ethernet/IP. The customer carries out the parameter set up with a detailed instruction manual. scanCONTROL Output Unit The scanCONTROL SMART and the gapCONTROL sensors directly communicate with the Output Unit via the Modbus interface which converts the measured values into analog signals or digital switch signals (good/bad evaluation). The system consists of a base (fieldbus coupler with filter module and end terminal) and one or two (analog + digital) output terminals. The following output terminals are available: Digital - 8 channels: positive/negative switching Analog - 4 channels: ±10V, 0-10V, 0-20mA or 4-20mA Related links Glossary: Measuring principle "Laser line triangulation" Add to watchlist Already added to watchlist back to product group "Accessories"