Modular multi-channel measuring system for highest precision
- up to 4 channels
The capaNCDT 6200 is the first entirely modular multi-channel measuring system. The controller can be expanded to 4 channels and is therefore suitable for flexible applications. All capacitive displacement sensors from Micro-Epsilon can be operated using the capaNCDT 6200 controller. The integrated Ethernet interface supports parameter setting and measurements via web interface. The DL6230 demodulator provides high resolution measurements. For high-speed measurements up to 20 kHz, the capaNCDT 6222 system is available.
- Measuring ranges (mm):
0.05 | 0.2 | 0.5 | 0.8 | 1 | 2 | 3 | 5 | 10 - Resolution max. 0.2 nm (with DL6230)
- Linearity max. 0.01µm
- Frequency response up to 20 kHz (-3dB)
- Data rate (digital output) 3.9 kHz
- Modular – expandable up to 4 channels
- Analog output (voltage/current)
- Ethernet/EtherCAT interface
- Easy configuration via web interface
- Integrated EtherCAT and PROFINET interfaces
The measurement system consists of one controller and the respective demodulator for the sensor. A modular design enables the system to be expanded at any time to four measuring channels. Therefore, an additional demodulator is integrated. The compact controller can be used as a benchtop unit, wall-mounted or DIN rail-mounted via an adapter. The capaNCDT 6200 is compatible with all sensor models from Micro-Epsilon.
Ease of use via web interface
Due to a user-friendly web interface, the entire configuration process of the controller and sensors is carried out without using any additional software. The web interface can be accessed via Ethernet and provides set up and configuration options for filters, arithmetic links and other parameters.
The capacitive DL6220 demodulator is used for numerous capacitive measurement tasks offering high resolution and signal stability. As well as analog outputs, the demodulator is equipped with, depending on the controller variant, an Ethernet or Ethernet/EtherCAT digital interface. The DL6220 demodulator is compatible with all sensors and cables of the capaNCDT series.
- Resolution dynamic 0.02 % FSO (5kHz)
- Frequency response 5kHz (-3dB)
- Analog output 0...10V (short circuit proof), 4...20mA
- Digital Ethernet interface (with DT6220 controller); Ethernet and EtherCAT with DT6230 controller
- Special tuning: up to triple standard cable length
The capacitive DL6230 demodulator is used for high resolution measurement tasks and can be applied in synchronous operation. As well as analog outputs, the demodulator is also equipped with, depending on the controller variant, an Ethernet or Ethernet/EtherCAT digital interface. The DL6230 demodulator is compatible with all sensors and cables of the capaNCDT series.
- Resolution dynamic 0.005 % FSO (5kHz)
- Frequency response 5kHz (-3dB)
- Analog output 0...10V (short circuit proof), 4...20mA
- Digital Ethernet interface (with DT6220 controller); Ethernet and EtherCAT with DT6230 controller
- Special tuning: up to triple standard cable length
The DT6222 capacitive controller is used for dynamic, capacitive measurement tasks. A frequency response of up to 20kHz (-3dB) enables reliable monitoring of fast processes. As well as analog outputs, the controller is also equipped with a digital Ethernet interface. The DT6222 controller is compatible with all sensors and cables of the capaNCDT series.
- Resolution dynamic 0.05 % FSO (5kHz)
- Frequency response 20kHz (-3dB)
- Analog output 0...10V (short circuit proof), 4...20mA
- Digital Ethernet interface
- Special tuning: up to double standard cable length (with DL6222/ECL2 demodulator)
The DT6240 capacitive controller with integrated PROFINET Industrial Ethernet interface allows direct integration of the full sensor performance directly into your PLC via PROFINET without additional interface modules. The measuring system with modular design is particularly impressive due to its price-performance ratio. The DT6240 controller is compatible with all sensors and cables of the capaNCDT series.
- Industrial Ethernet interface PROFINET
- Modular expandable up to 4 channels
- Synchronizable
- Resolution dynamic 0.005% d.m. (5kHz)
- Analog output 0 ... 10 V (short-circuit proof, 4 ... 20 mA)
- Special tuning: up to 3 times standard cable length
The mounting frame is designed for use with capacitive sensors for two-sided thickness measurements and helps to align the measuring points with one another. The frame allows for the sensors to lie exactly on one axis, meaning that the measuring points are arranged congruently. This prevents measurements at an offset and a reliable measurement result is achieved with the highest possible precision. The mounting frames provide space for up to 6 sensors. Two sensors each form a measuring point.
- Multi-track thickness measurement at up to 3 points simultaneously
- High temperature stability for precise measurements at temperatures of up to 100 °C
- Suitable for vacuum
- Extremely compact design
- Easy integration and retrofitting in existing systems
- Compatible with capaNCDT sensors
- Calibratable design for high precision in thickness measurements
